How To Install The Security Camera, Installation Methods And Steps

How to install the Security camera, installation methods and steps

I installed a Security camera at home. Since I only installed one, I bought it directly online. How to install it? The following are the specific steps.

1. Before installing the Security camera

Before arranging the camera, you must first decide where to place your camera and at which point to fix it. What to shoot.

The fixed position of the camera is very important, and what kind of camera you are going to purchase, the parameters of the camera are mainly the effective distance.

2. Security camera installation

If the analog Security camera is connected to the computer, the following operations are required:

1. Purchase a DC 12V power supply, a camera bracket (except for the hemisphere), a 75-3 video cable of appropriate length, a two-core power cord, and a capture card and a pair of BNC connectors;

2. Install the capture card on the computer motherboard and install the driver;

3. Place the camera in a suitable position, connect the power cord, solder the BNC head, and pull the cord to the computer;

4. Solder a section of the BNC header, connect it to the capture card, and switch on the power supply;

5. Make some simple configurations on the capture card, and change the storage time or mode.